Speck pumpen BADU Eco Touch-pro Ficha Técnica página 15

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
EN
The pump has a permanently magnetic motor and is electronically protected against
overload.
Connecting external switch contacts
The pump has a 5-wire cable with open ends for external control. Assignment of the
cables to the individual speeds is as follows:
The cables must be connected potential free. Only switch the contacts individually.
Otherwise the desired speed is not activated.
Note
The motor speed is switched on using the manual button or external switch contacts.
The switch contacts and the assigned speed are activated.
If the pump starts from a standstill, it starts up in priming mode and subsequently with
the selected fixed speed.
During running operation the pump is started up to the fixed speed directly, without
priming time.
12/2012
VG 766.2150.069
White
= n 1
Green
= n 2
Brown
= n 3
Red
= Stop
Black
= GND/common
GND
e.g. 3-channel
timer with
potential free
switch contacts
15
Tabla de contenido
loading

Tabla de contenido