Construction; Accessories; Unpacking - Hoshizaki FM-480AKE-HC Manual De Instalación

ENGLISH

1. CONSTRUCTION

Air Filter

2. ACCESSORIES

CD
Mounting Bracket
Power Supply Cord
Connector Cover

3. UNPACKING

Children should not be allowed in reach of the packaging elements (plastic bags and expanded polystyrene) as they are
potential sources of danger.
Do not lift or manoeuvre the carton by using the shipping bands.
When moving the unit by hand, remove the panels and hold the unit frame.
Always wear protective gloves when carrying the unit.
When handling the carton or the unpacked unit, work in pair to prevent injury.
Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will not work properly.
This icemaker needs a storage bin. The recommended storage bin is HOSHIZAKI ICE STORAGE BIN, Model B-300SD(PD) or
B-500SD(PD) with top kit - 8C, B-700SD(PD) with top kit - 22C, or B-900SD(PD) with top kit - 22C and top kit -8C.
1) After removing the packaging, make sure that the icemaker and the storage bin are in
good condition. If in doubt, please do not use the icemaker but apply to professionally
qualified personnel. See the instruction sheet attached to the storage bin for its
unpackaging and installation guidelines.
2) Remove the shipping tape holding panels.
3) Remove the front, top, and side panels.
4) Remove the package of accessories. Check the contents according to "2.
ACCESSORIES".
5) Remove the protective plastic film from the panels. If the icemaker is exposed to the
sun or to heat, remove the film after the icemaker cools.
Power Supply Cord
Operation Panel
Louver
1
2
1
1
CD
Mounting Bracket
Top Panel
Power Supply Cord
WARNING
CAUTION
NOTICE
2
Louver
Front Panel
Connector Cover
Front Panel
Top Panel: Remove the screw. Lift off.
Front Panel: Remove the screw. Lift up and pull
toward you.
Side Panel: Remove the screws. Pull slightly
toward you.
Top Panel
Side Panel