Using Your Purifier - Levoit Vista 200 Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
GETTING STARTED (CONT.)
4.
Replace the filter cover and the cap. Twist
the cap clockwise to lock.
5.
Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 in of clearance on all sides of
the purifier. Keep away from anything that
would block air flow, such as curtains.
[Figure 1.5]
15 in /
38 cm
8
[Figure 1.4]
Figure 1.4
15 in /
38 cm
Figure 1.5
U S I N G YO U R
P U R I F I E R
1.
Connect the AC power adapter to the air
purifier. Plug into an outlet.
2.
Tap
to turn on the purifier. The fan will
start on level I.
3.
Optionally, tap
to change fan speed
between I, II, and III.
Note:
The indicators are not buttons and
cannot be used to change the fan
speed.
The fan speed indicators will light up
when activated.
Fan speed III is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at maximum speed (level III)
for 15–20 minutes before using a lower
speed.
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
4.
Tap
to turn off the air purifier.
Figure 2.1
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
[Figure 2.1]
Tabla de contenido
loading

Tabla de contenido