Plug Connection - Lenze M Serie Instrucciones Para El Montaje

Plug connection

The connectors comply with vibration and shock class 3M6 as specified in IEC/EN60721-3-3.
This applies to all power, encoder and fan connector boxes.

Stop!
Cable connectors with screwed connection:
ƒ
– Always use with the O-rings supplied.
Cable connectors with a SpeedTec bayonet lock:
ƒ
– Remove O-ring and dispose of it.
When connecting the cable connector to the motor connector, make sure that the aids to
orientation (pos. 1) are facing each other. Only then trouble-free operation is ensured.
ƒ Tighten the box nut of the cable connectors!
ƒ Never disconnect cable connectors whilst voltage is being applied! Otherwise the
connector may be destroyed! Inhibit the inverter before disconnecting the plugs!
Lenze • MA 33.0003 • 5.0
Mechanical installation
Plug connection
16