Stihl FSE 60 Manual De Instrucciones página 12

!
Warning!
When using the electric trimmer, always
keep the power supply cord and
extension cord behind you and away
from the cutting tool. Always ensure that
your power cords do not become
entangled with obstacles or objects.
Damaged cords may cause
electrocution. Always disconnect the
plug from the power supply when you
take a break.
!
Warning!
Avoid damage to the power cords. Keep
cords away from heat, oil and sharp
edges. Never carry trimmer by power
cable or yank power cable or extension
cord to disconnect the plug from the wall
outlet. To unplug, grasp the plug not the
cord.
FSE 60
!
Warning!
Always switch off the motor and make
sure the cutting attachment has stopped
before putting an electric trimmer down.
Disconnect the trimmer from the power
supply when not in use, before servicing,
when changing accessories such as
trimmer line, and the like.
To reduce the risk of unintentional
starting, never carry a plugged in unit
with your finger on the switch. Be sure
the switch is off when plugged in.
Transporting the electric trimmer
When transporting your electric trimmer
in a vehicle, properly secure it to prevent
turnover and damage to the electric
trimmer.
Preparation for the use of the electric
trimmer
Adjust hand grip to suit your size before
starting work. The machine should be
properly balanced as specified in your
owner's manual for proper control and
less fatigue in operation. Always check
your electric trimmer for proper condition
and operation before starting,
particularly the power supply cord, plug,
switch, cutting tool and deflector.
!
Warning!
Inspect the power supply cord plug, and
extension cord before and after each
use for signs of damage or aging.
English / USA
A
An arrow on the deflector shows the
correct direction of rotation of the cutting
tool.
The cutting tool must be properly
tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.) and for cracked, bent,
warped or damaged parts.
Follow the instructions in the appropriate
section of this owner's manual when
changing cutting attachments.
11