Gas Cylinder - CharGriller Grillin Pro 3001 Manual Del Propietário

Lighting Burner with a
Match
1. Push in and rotate knob to HIGH position
2. Place match in match holder installed on side of grill
housing. Once lit, place flame through cooking grates
near burner ports, as shown. Burner should light
immediately.
3. Adjust knobs to desired cooking settings.
Observe Flame Height When
Lit
View burner flame through flame viewing hole. Flame
should be blue and yellow in color, and approximately
1.2 - 1.9cm tall on HIGH setting.
Disconnecting the Gas
Cylinder
1. Turn all control knobs to the OFF position and turn the handle on the
gas cylinder clockwise until it stops.
2. Turn coupling nut on regulator in a counter-clockwise direction until
regulator is released from threaded gas cylinder valve nozzle.
3. Place the protective cap over gas cylinder gas nozzle.
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance. When the appliance is not in use, it should be covered and stored in a dry, dust-free
environment.

Gas Cylinder

The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder
must be disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from
the appliance.
C-4