CharGriller Grillin Pro 3001 Manual Del Propietário página 22

Step 12
Install the Burners into the Grill Body by inserting the IGNITER WIRES and Burners through the open
holes at the front of the Grill Body from inside of the Grill Body, see figure 12A. (NOTE: IGNITER
MUST BE ON BOTTOM SIDE OF BURNER). The BURNER with the longer wire goes on the right
side of the GRILL BODY. Making sure that the Valve goes inside each burner, see figure 12B. Then
secure the Burners to the Grill Body with the screws provided, see figure 12C.
Igniter with Wire
3001_OM_E.2
12
Figure 12A
Valve
Burner
Figure 12B
Burner
Screw
Burner
Figure 12C