Tabla de contenido
Idiomas disponibles
Idiomas disponibles
[] Troubleshooting
Guide
If the unit does not perform
properly
when operated
as instructed
in this operation
manual, check the following
chart
once before calling for service
No power
No picture or sound
No color
Sound OK0 picture poor
Picture distorted
Weak picture
Lines or streaks in picture
Picture blurred
Ghosts in picture
Bars on screen
Picture rolls vertically
Different
color marks on
screen
Poor reception
on some
channels
Picture OK, sound poor
No reception
of digital
signals
Be sure the power cord is plugged
in
Ira power failure occurs, unplug
the power cord for 30 minutes
to allow the unit to
reset itself
Check if the power is on
Check the outlet
connection
Check the antenna
or cable connection
to the main unit,
• When the outside
antenna
is used, check the wire condition
and connection,
- View other TV channels
The problem
might be limited
to the broadcasting
station
-Turn offthe
power and wait for about
I minute, then turn it on again.
Check the antenna
or cable connection
to the main unit
• When the outside
antenna
is used, check the wire condition
and connection,
• View other TV channels
The problem
might be limited
to the broadcasting
station
• Adjust the "COLOR" in the main menu
• Check the antenna
or cable connection
to the main unit
• When the outside
antenna
is used, check the wire condition
and connection
• Electrical
interference
from nearby appliances
may affect picture
quality
Adjust"CONTRAST"and
"BRIGHTNESS" in the main menu
• View other W channels
The problem
might
be limited
to the broadcasting
station.
•When the outside
antenna
is used, check the wire condition
and connection
. View other IV channels
The problem
might be limited to the broadcasting
station.
, Check the antenna
or cable connection
to the main unit
. When the outside
antenna
is used, check the wire condition
and connection
• Adjust "CONTRAST" and "BRIGHTNESS" in the main menu
• View other wIVchannels
The problem
might
be limited
to the broadcasting
station
• When the outside
antenna
is used, check the wire condition
and connection
, Electrical interference
from nearby appliances
may affect picture
quality,
• View other TV channels
The problem
might
be limited
to the broadcasting
station.
• When the outside
antenna
is used, check the wire condition
and connection..
• View other TV channels
The problem
might
be limited
to the broadcasting
station
• Check the antenna
or cable connection
to the main unit
• When the outside
antenna
is used, check the wire condition
and connection
• Electrical
interference
from nearby appliances
may affect picture
quality
• View other TV channels
The problem
might
be limited
to the broadcasting
statiom
• When the outside
antenna
is used, check the wire condition
and connection
• Electrical
interference
from nearby appliances
may affect picture quality
• When the outside
antenna
is used, check the wire condition
and connection
• Electrical
interference
from nearby appliances
may affect picture quality
. View other W channels
The problem
might
be limited
to the broadcasting
station
• Move the unit away from nearby electric
appliances
Turn off the power and wait
30 minutes
before turning
it back on
• View other TV channels
The problem
might
be limited
to the broadcasting
station
• Check the antenna
or cable connection
to the main unit.
• When the outside
antenna
is used, check the wire condition
and connection,
• Electrical
interference
from nearby appliances
may affect picture quality.
• View other TV channels
The problem
might
be limited
to the broadcasting
station.
• View other TV channels
The problem
might
be limited
to the broadcasting
station.
• Make sure auto channel
scan has been completed
(Refer to "Auto Channel
Scan" on
page 13)
Auto channel
scan must be completed
when you set up the unit for the first time
or move it to a location
where previously
unavailable
channels
are broadcast
• The selected
channel
may not be broadcasting
• When auto channel
scan is interrupted
and not completed,
some channels will not
be received
Make sure to complete
(Refer to"Auto
Channel
Scan" on page 13)
EN
Tabla de contenido
