Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Make sure that it is firmly connected before
proceeding any further. To release the hose,
simply press the release key (E1) and at the
same time remove the moulded plug (3).
INSTRUCTION FOR USE
•
Vaporetto is now ready for use.
VAPORETTO HANDY
•Connect
the
power
cord
(F)
into
electrical outlet of the
correct voltage.
•Press
the
ON/OFF
switch (B).
•The ON lamp (C) and
the
steam
pressure
indicator lamp (D) will
both light up.
•Wait
for
the
steam
pressure indicator lamp
(D) to go out (about 5
minutes).
an
output of steam press the safety button (2A).
To resume delivery press the safety button
(2A) in the opposite direction and operate
the steam control lever (4).
The first jet of steam may contain some
water droplets, due to the hoses being
colder than the steam coming from the
boiler; in a moment steam will continuously
flow from the unit. We would therefore
advise that the first jet of steam is sprayed
onto an old cloth until a constant steam flow
is obtained.
Note: The steam pressure indicator lamp (D)
may go on and off periodically during use of
Vaporetto, this is quite normal.
If you press the steam request lever (4) when
the appliance is still under pressure, even if the
power is off and not connected to electricity, you
may still experience steam escaping from the
flexible hose.
When you switch off the appliance, before
storing it, it is neccessary to press the steam
request lever (4) until the steam flow and excess
water are exhausted.
CONNECTION OF ACCESSORIES
9
• The steam sprayer (2)
has a safety button (2A)
that prevents accidental
activation of the steam
delivery system by a
child or other persons
unaware of how the
device
works.
prevent the accidental
•To
connect
the
extension tubes (7) to
the steam gun, the large
brush
(8)
and
the
adapter (5), simply join
them to one another
until
the
accessory
locking button (11) clicks
into place.
To
Tabla de contenido
