Rohde & Schwarz NRT2 Manual De Instrucciones página 32

Tabla de contenido
®
R&S
NRT2
ZERO
SYSTEM
Opens the "System Overview" dialog.
Cursor Block
See
The cursor keys are context-sensitive and used as follows:
Selecting a menu.
Selecting the active window.
Moving the cursor in text boxes.
Changing the value of an entry in a text box.
Selecting an element from a drop-down list.
USB Host Interface
See
USB 2.0 (universal serial bus) interfaces of the type A (host USB). Used to connect
external devices like a keyboard, mouse, memory stick, or to perform a firmware
update.
On/Standby Key
See
The ON/STANDBY key toggles the R&S NRT2 between standby and ready state.
The following states are possible:
Off (no color)
The AC power switch on the back of the R&S NRT2 is switched off. The R&S
NRT2 is disconnected from the AC power supply.
Ready (green)
The R&S NRT2 is ready for operation.
Standby (red)
The power supply has the operating voltage supplied to it.
For operating details, see
Getting Started 1430.0573.02 ─ 02
Sets the R&S NRT2 to its default setting. Default settings are sensor specific.
Sets the R&S NRT2 to a setting selected from the recall list.
Starts the zero calibration.
Displays zeroing status.
Displays sensor status.
Figure
5-1.
Figure
5-1.
Figure
5-1.
Chapter 4.1.4,
"Starting",
on page 13.
Instrument Tour
Front Panel Tour
17
Tabla de contenido
loading

Tabla de contenido