Troy-Bilt 01924 Manual Del Usuario página 15

TROU B LES H OOTi NG
Probmem
No AC output is avaHabme, but
generator is running.
CaU$_
I. One of the drcuit breakers is
open,
2. Fault in generator.
3, Poor connection or defective cord
seL
4. Connected device is bad.
Correction
Reset drcuit breaker.
2. ContactAuthorized service facHit7.
3. Check and repair.
4, Connect another device that is in
good condition,
Generator runs good at no-load 1. Short circuit in a connected load. Disconnect shorted electrical load.
but "bogs" down" when loads are 2. Generator is overloaded. 2. See "Don't Overload Generator".
connecteds 3. Shorted generator circuit. 3. ContactAuthorized service facilit_
Generator wii[ not start_ or starts Low oil level. Fill crankcase to proper level or place
and runs roughs generator on level surface,
1. Out of gasoline, Fill fuel tank.
Generator shuts down during
operation, 2, Low oil level, 2, Fill crankcase to proper level or
place generator on level surface.
Generator lacks powers Load is too high. See "Don't Overload Generator".
4@