Módulo De Batería; Humidificación; Desacoplamiento Del Módulo De Batería O El Humidificador - Philips Respironics BiPAP A40 Guía De Instalación Y Operación Del Propietario

Módulo de batería
4
Para conectar el módulo de batería
al BiPAP A40 e instalar la batería
extraíble, siga los pasos siguientes:
1. Retire la cubierta lateral del
equipo de terapia
2. Alinee el módulo de batería
extraíble y el equipo de terapia
hasta juntarlos
3. Apriete hasta que queden
encajados
4. Introduzca la batería extraíble en
el módulo de batería y cierre la
tapa
Humidification
Humidification
Humidificación
5
Humidification
Humidification
Humidification
With device turned off, remove and fill chamber with water.
1. (a) Lift humidifier door until it locks in place. Do not force
door higher than the locked position. (b) Grasp front of
chamber and slide toward you.
With device turned off, remove and fill chamber with water.
1. (a) Lift humidifier door until it locks in place. Do not force
2. (a) Gently push tab located inside round opening on top
door higher than the locked position. (b) Grasp front of
of chamber. (b) Separate top and bottom of chamber.
chamber and slide toward you.
With device turned off, remove and fill chamber with water.
1. (a) Lift humidifier door until it locks in place. Do not force
2. (a) Gently push tab located inside round opening on top
door higher than the locked position. (b) Grasp front of
3. Fill bottom chamber with distilled water.
of chamber. (b) Separate top and bottom of chamber.
chamber and slide toward you.
2. (a) Gently push tab located inside round opening on top
3. Fill bottom chamber with distilled water.
of chamber. (b) Separate top and bottom of chamber.
4. Observe maximum fill lines located on sides of chamber.
3. Fill bottom chamber with distilled water.
4. Observe maximum fill lines located on sides of chamber.
5. Do not overfill.
Reassemble the chamber by placing the hinges on lid over the
two tabs on back of chamber. Close lid until it locks in place
with an audible click. Insert filled chamber into humidifier.
4. Observe maximum fill lines located on sides of chamber.
5. Do not overfill.
Reassemble the chamber by placing the hinges on lid over the
2
3
4
With device turned off, remove and fill chamber with water.
1. (a) Lift humidifier door until it locks in place. Do not force
door higher than the locked position. (b) Grasp front of
chamber and slide toward you.
With device turned off, remove and fill chamber with water.
1. (a) Lift humidifier door until it locks in place. Do not force
2. (a) Gently push tab located inside round opening on top
door higher than the locked position. (b) Grasp front of
of chamber. (b) Separate top and bottom of chamber.
chamber and slide toward you.
Desacoplamiento del módulo
de batería o el humidificador
2. (a) Gently push tab located inside round opening on top
3. Fill bottom chamber with distilled water.
of chamber. (b) Separate top and bottom of chamber.
3. Fill bottom chamber with distilled water.
4. Observe maximum fill lines located on sides of chamber.
4. Observe maximum fill lines located on sides of chamber.
5. Do not overfill.
Reassemble the chamber by placing the hinges on lid over the
two tabs on back of chamber. Close lid until it locks in place
with an audible click. Insert filled chamber into humidifier.
5. Do not overfill.
Reassemble the chamber by placing the hinges on lid over the
two tabs on back of chamber. Close lid until it locks in place
Pasador de
liberación
(vista inferior)