Powering On The Intellibrite Light(S); Troubleshooting; Outlet Box Specifications - Pentair INTELLIBRITE CONTROLLER Guía De Instalación Y De Usuario

3

Powering on the IntelliBrite light(s)

When the IntelliBrite LED light is powered on, a momentarily white light
will illuminate, followed by the dial selected color.

Troubleshooting

Use the following tips to help to resolve problems that might occur while
operating the IntelliBrite Controller.
Both of the
LEDs are
flashing.
Outlet Box Specifications (purchased separately)
The IntelliBrite Controller requires a standard outlet box which is purchased
separately. The outlet box must meet the following specifications:
• Outlet box type: 22.5 cubic inches (minimum) - Suitable for wet
locations with UL/CSA approval listings. Check the inside of outlet
box for specification label.
• A minimum of one 3/4" steel conduit.
INTELLIBRITE CONTROLLER Installation and User's Guide
®
The IntelliBrite Controller has detected that the load has
exceeded the maximum allowable wattage or the output is
shorted out
1. Switch of the IntelliBrite Controller OFF. Remove exces-
sive load or short.
2. Press the IntelliBrite Controller power switch to power on
the unit. Ensure that the LEDs are no longer flashing.
2.75"
Outlet Box (22.5 cubic inches minimum)
4.50"
1.60"