Kenmore 721.26082 Manual De Uso Y Cuidado página 5

Before assembling your vacuum cleaner, be
sure you have all the parts shown in PARTS
AND FEATURES.
TELESCOPIC WAND
Push the knob and pull out wand to required
length.
Knob
RUG/FLOOR NOZZLE
1. Insertwand intorug/floor nozzle.
2. Push floor selector switch back for bare floor
and forward for carpet. Brushes should be
down for bare floor and up for carpet.
Bare Floor Carpet
ATTACHMENTS
Clamp Accessory Holder around upper Pipe
as shown.
CANISTER
1. Open the canister hood.
2. Check to see that the dust bin is properly
installed. See CLEANING THE DUST BIN
AND WASHABLE FILTER for instructions.
3. Check to see that the motor safety filter is
properly installed. See CLEANING MOTOR
SAFETY FILTER for instructions.
Motor
Safty Filter_\
Dust Bin__
HOSE
Fitting Hook
1. Insert hose into canister until it snaps into
place.
To remove hose : Press hose fitting hook
and pull upwards.
2. Insert wand into handle by twisting slightly.
To remove handle : Pull up on handle by
twisting slightly.
-5-