Features; Control Panel; Charging The Internal Battery - RedFuel SL1 Manual Del Usuario

6. FEATURES

1

7. CONTROL PANEL

DIGITAL DISPLAY
When connected to a battery, the digital
display indicates the battery's voltage.
When not connected to a battery, the
digital display indicates the percent of
charge of the jump starter's internal
battery. See the Display Messages
section for a complete list of messages.
NOTE: During charging, the display will
go into sleep mode and will not display
any messages. To turn the display back
on, press any button.

8. CHARGING THE INTERNAL BATTERY

IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 3-6 MONTHS, TO KEEP THE
INTERNAL BATTERY FULLY CHARGED
AND PROLONG BATTERY LIFE.
8.1 To reduce the risk of electric shock,
unplug the unit's wall charger from the
outlet before attempting any maintenance
or cleaning. Simply turning off the controls
will not reduce this risk.
8.2 When charging the internal battery, work
in a well ventilated area and do not restrict
the ventilation in any way.
2
3
7
6
16 17
14 15
13
10
11
12
1. SL1
2. Battery clamp adaptor
4
3. 100V~120V AC wall charger
4. USB/Micro USB connector
5. 12V port adaptor
6. 12V DC accessory adaptor
7. Case
8. 12V Input socket for recharging
9. Light
10. USB port
5
11. 12V DC port
12. Jump starter input socket
13. Jump Start button
14. Digital display
8
15. Charging LED indicator
9
16. 12V/USB button
17. Light button
LED INDICATOR
• Green LED solid – The internal battery
is charging.
• Green LED flashing – Charging has
aborted.
• Green LED pulsing – The internal
battery is fully charged.
FUNCTION BUTTONS
IMPORTANT: Do not use the unit while
charging the internal battery.
8.3 CHECKING THE LEVEL OF THE
INTERNAL BATTERY
To check the internal battery's charge
status, make sure the unit is turned OFF,
then press the
display will show the battery's percent of
charge. A fully charged battery will read
100%. Charge the internal battery if the
display shows it is under 100%.
• 5 •
LIGHT – Operates the LED light
12V/USB – Enables the 12V DC
port and the USB port
JUMP START – Enables the jump
start function
or button. The digital