THOMSON MIC200IDABBT Manual De Instrucciones página 27

Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2. Press and hold the POWER/MODE button for 2 seconds to turn on the unit, then press the
POWER/MODE button repeatedly until the "Bluetooth" indicator appears on the LCD display. It will
be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named "MIC200IDABBT".
4. Your mobile phone will find "MIC200IDABBT" and will present the option to connect or not. Please
connect to it using the password "0000" (if any). When you are successfully connected, the
Bluetooth indicator "BT connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone
have been paired once, they will automatically connect when the unit is on and Bluetooth is activated
on the phone. The next time you power on, the unit will automatically connect to the most recently
connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the PLAY/PAUSE/SCAN button to play. Press the PREV or
NEXT button to skip the tracks backwards or forwards. To pause or resume play, press the PLAY/PAUSE/
SCAN button again. Press and hold the PLAY/PAUSE/SCAN button for 2 seconds to disconnect Bluetooth.
Time and Date
The first time you listen to DAB radio, the time and date of your product will be synchronised automatically
to that broadcast by the DAB service in 24-hour mode; which is automatically synchronized with
daylight saving time, so there is no need to manually set the time and date.
If you do wish to set the time and date manually, turn on the radio and follow the steps below:
1. In DAB mode, press and hold the MENU/INFO button until <Full scan> is displayed.
2. Use the NEXT/PREV button to scroll to <System>. Press and release the STOP/SELECT button.
3. Use the NEXT/PREV button to scroll to <Time>. Press and release the STOP/SELECT button.
<Set Time/Date> is displayed. Press and release the STOP/SELECT button.
4. 'Set time' is displayed, and the hour digits will flash. Use the NEXT/PREV button to scroll to the
correct hour. Press the STOP/SELECT button.
5. The minutes will now flash. Use the NEXT/PREV button to scroll to the correct minute. Press the
STOP/SELECT button.
6. 'Set date' is displayed, and the day will flash. Use the NEXT/PREV button, together with the STOP/
SELECT button, to select and confirm the day, month and year, using the same method used to
set the time.
7. When you confirm the correct date, 'Time Saved' is displayed and the display returns to <Set Time/Date>.
You can now use the NEXT/PREV button to scroll and the STOP/SELECT button to select, as you did
to set the time and date to change the settings for:
12/24-hour clock display, the date format, DD-MM-YYYY or MM-DD-YYYY, and to opt to auto-update
the time from the DAB signal, FM signal, DAB or FM signal or to decline updates.
Setting the Alarm
Note: Check that the radio has the correct time and date before you set an alarm.
With your unit switched on (not in Standby mode):
1. Press and hold the MENU/INFO button to enter the menu options.
2. Use the NEXT/PREV button to scroll to '<System>'. Press the STOP/SELECT button to select.
3. Use the NEXT/PREV button to scroll to '<Alarm>'. Press the STOP/SELECT button to select.
4. 'Alarm 1 (or 2) Setup' is displayed. Press the STOP/SELECT button to select.
5. 'Alarm 1 (or 2) Wizard On time' is displayed and the hour digits for the alarm will flash.
6. Use the NEXT/PREV button to set the hour for the alarm and press the STOP/SELECT button to select.
7. The minutes will now flash. Use the NEXT/PREV button to scroll to the minutes for the alarm and
press the STOP/SELECT button to select. The duration time will now flash.
8. Use the NEXT/PREV button to scroll to the duration for the alarm. You can choose from 15, 30, 45, 60,
- EN 9 -