Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Insignia NS-R5100 AV Digital Home Theater Receiver
Connecting audio components
CD
TAPE
To connect your audio components:
1 Connect your audio cable to the receiver
based on the type of device you are
connecting.
Jack
Device
TAPE
Tape deck or MD recorder.
CD
CD player.
AUX
Additional CD player or tape deck.
2 Connect the other end of the cable to the
device.
Connecting six channel components
To connect your six channel components:
1 Connect your audio cables to the receiver.
2 Connect the other ends of the cables to the
corresponding analog outputs of a six
channel decoder or DVD player with six
channel Dolby Digital (DTS) output.
Connecting digital audio devices
Devices that use the VIDEO 1 or VIDEO 2 jacks
for video can use the DIGITAL IN jacks for audio.
AUX
These devices must be able to output DTS
Digital Surround, Dolby Digital, or PCM format
digital signals.
To connect your digital audio devices:
1 Connect your optical or coaxial digital audio
2 Connect the other end of the cable to the
Connecting a powered subwoofer
Use a powered subwoofer to empathize deep
bass sounds.
To connect your subwoofer:
1 Connect your subwoofer cable to the
2 Connect the other end of the cable to the
www.insignia-products.com
Component with coaxial digital out
Component with coaxial digital out
Component with optical digital out
cable to the receiver.
corresponding digital output jack on your
audio device.
Caution
Some optical fiber cords may not work with this
receiver. Consult your dealer if the optical cord
does not fit into the receiver.
Note
When making a coaxial connection, use a 75 Ω
coaxial cable instead of a conventional audio
cable.
Note
Use only one digital audio connection for each
device. Do not connect one device using more
than one connection.
Note
For more information, read the user guide that
came with your device.
receiver.
powered subwoofer.
Powered subwoofer
7
Capítulos
Tabla de contenido
