Using The Sleep Timer - Insignia NS-R5100 Guía Del Usario

Scanning preset stations in sequence
To scan preset stations:
1 Select the tuner as the input source.
2 Press the PRESETS button on the remote
control.
The receiver starts scanning the stations in
the preset sequence. Each station is
sampled for five seconds.
3 Press the PRESETS button again to stop
scanning.
Recording
Notes
• Analog signals from the EXTERNAL INs as
well as the digital signals from the coaxial or
optical digital input can be heard but cannot be
recorded.
• The volume and tone (bass and treble) settings
have no effect on the recording signals.
Recording on tape
To record on tape: 1 Select the recording input source (this cannot
be TAPE).
2 Start recording on the tape recorder.
3 Start play on your input device.
Dubbing from video components onto VIDEO1
To dub from video components onto VIDEO1:
1 Select the video source (VIDEO2 or
VIDEO3).
OR
2 Start recording on the video recorder.
16
OR
www.insignia-products.com
Insignia NS-R5100 AV Digital Home Theater Receiver
3 Start play on your input device.
Note
The audio and video signals from the input are
dubbed onto the VIDEO1 recorder. You can view
them at the same time on the television and hear
them from the speakers.
Dubbing from audio and video signals separately
onto VIDEO1
Use this procedure if yo are dubbing the video
from VIDEO2 and mixing it with the audio from
the CD audio onto VIDEO1.
To dub from video components onto VIDEO1:
1 Select VIDEO2 as the video recording
source.
OR
2 Select CD as the audio recording source.
OR
3 Start recording on the video recorder.
4 Start play on the video source and on the CD
source.
Notes
• The audio and video signals from the inputs
are dubbed onto the VIDEO1 recorder. You can
view them at the same time on the television
and hear them from the speakers.
• Make sure that you follow the order of steps 1
and 2.

Using the sleep timer

The sleep timer automatically turns the receiver
off after a specified period of time.
To use the sleep timer:
• Press the SLEEP button to specify the
amount of time you want the receiver to play.