Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Never use your fingers to hold. Always use
the push tool..
1. Turn the machine on the switch (11).
2. Hold the handle (15) with the right hand and push the
button (25) to reléase the head.
3. Allow the motor to reach full speed.
4. Execute the cut by slowly lowering the cutting arm
towards the workpiece.
5. Make sure your fingers are far away from the saw
blade area.
6. Lower the cutting arm to the work piece.
7. Release the blade guard release lever (11).
Dust/Chip Extraction
Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful
to one's health. Touching or breathing-in the dusts can
cause allergic
reactions and/or lead to respiratory infections of the user
or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-
treatment additives (chromate, wood preservative).
Materials containing asbestos may only be worked by
specialists.
– Always use dust extraction.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
The dust/chip extraction can be blocked by dust, chips or
workpiece fragments.
– Switch the machine off and pull the mains plug from the
socket outlet.
– Wait until the saw blade has come to a complete stop.
– Determine the cause of the blockage and correct it.
Integrated Dust Extraction
– Mount extraction adapter firmly onto chip ejector.
– Mount dust bag firmly onto extraction adapter.
During sawing, the dust bag and the extraction adapter
may never come in contact with moving tool components.
Always empty the dust bag in good time.
External Dust Extraction
For dust extraction, you can also connect the extraction
adapter 31 to a vacuum hose (Ø 32 mm).
The vacuum cleaner must be suitable for the material
being worked.
When vacuuming dry dust that is especially detrimental to
health or carcinogenic, use a special vacuum cleaner.
5. Maintenance and service instructions
5.1 Repair service
Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
ENGLISH
17
as spare parts.
Exploded views and information on spare parts can also
be found under: [email protected]
Our customer consultants answer your questions
conceming best buy, application and adjustment of
productsand accessories.
5.3 Warranty
Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and retum to vendar with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: lf you cannot find the warranty card within
the documentation,youmust ask for it through your
supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired otherthan themanufacturer.
5.4 Disposal and recycling
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into national
right,power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
Subject to change wlthout notlce.
6. Regulations
6.1 Technical Data
= Rated power input
= Load speed
= Disc Diameter
= Weigh
= Cutting capacity 90º
= Cutting capacity 45º
= Cutting capacity 45º
= Cutting capacity compound 45º-45º
17
Tabla de contenido
