Tabla de contenido
Idiomas disponibles
Idiomas disponibles
workpiece may not be moved until after the machine
has come to a complete stop. Correct the cause for the
jamming of the saw blade before restarting the machine.
- Never leave the machine before it has come to a
complete stop. Cutting tools that are still running can
cause injuries.
- Guide the saw blade against the workpiece only
when the machine is switched on. Otherwise there is
danger of kickback when the saw blade becomes wedged
in the workpiece.
- Never stand on the power tool. Serious injuries can occur
when the power tool tips over or when inadvertently coming
into contact with the saw blade.
- Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
The male plug must only be connected to a socket
with the same technical characteristics as the male
plug.
3. Instrucciones de puesta en servicio
First put in place.
Carefully remove the tool and all loose items from the
shipping container.
Retain all packing materials until after you have inspected
and satisfactorily operated the machine.
3.1 Assembly
Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be
connected to the mains supply.
Note: Check the power tool for possible damage.
Before further use of the machine, check that all protective
devices are fully functional. Any lightly damaged parts
must be carefully checked to ensure flawless operation
of the tool.
All parts must be properly mounted and all conditions
fulfilled that ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service centre.
Mounting the Locking Knob
– Screw the locking knob 7 into the corresponding drill
hole above the lever 6.
Always tighten the locking knob 12 firmly
before sawing. Otherwise the saw blade can
become wedged in the workpiece.
ENGLISH
14
Stationary or Flexible Mounting
To ensure safe handling, the machine must be
mounted on a level and stable surface (e. g.,
workbench) prior to using.
Mounting to a Working Surface
– Fasten the power tool with suitable screw fasteners to
the working surface. The mounting holes 17 serve for
this purpose.
Montaje transitorio
– Sujete los pies de la herramienta eléctrica a la base
de trabajo con unos tornillos de apriete usuales en el
comercio.
Read all safety warnings and instructions
included with the worktable. Failure to observe
safety warnings and instructions can lead to
electrical shock, fire and/or cause serious injuries.
Assemble the worktable properly before
mounting the power tool. Perfect assembly is
important in order to prevent the risk of collapsing.
– Mount the power tool in transport position on the saw
stand.
3.2 Descripción ilustrada de funciones
1. Saw blade guard.
2. Cutting dics.
3. Lateral extension bar.
4. Guide limit.
5. Cutting table.
6. Release lever for angle adjustment.
7. Remote locking angle adjustment.
8. Machine fixing holes.
9. Adjustable cutting stop.
10. Clamp.
11. ON/OFF Switch.
12. Safety button.
13. Vertical cut angle stop setting screw.
14. Head sliding bars.
15. Main handle.
16. Adjusting of cutting depth.
17. Knob fixing head.
18. Pin fix head.
19. Retention for assemblig the disc.
20. Dust bag.
21. Mitre cut angle set locking knob.
22. Stop cutting lenght.
23.Laser guide switch.
24. Interlocking butterfly to extend table or
side extension bar
25. Head lock protection
26. Vertical miter angle scale
27. Horizontal miter angle scale
28. Horizontal angle indicator
29. Vertical angle indicator
30. Quick-closing jaw drills
31. Suction adapter
14
Tabla de contenido
