Base Station Installation - Vertex Standard VX-6000 Manual De Operación

Base Station Installation

P c
ower onnection
Operation of the VX-6000 transceiver from an AC line requires a power supply capable
of providing at least 30 Amps continuously at 13.4 Volts DC. Please contact your dealer
to select an optimal power supply that satisfy these requirements.
Use the supplied DC power cable for making power connections to the power supply.
Connect the RED power cable lead to the POSITIVE ( + ) power supply terminal, and
connect the BLACK power cable lead to the NEGATIVE (–) power supply terminal.
A i
ntennA nstAllAtion
When used the VX-6000 transceiver as a base station, the antenna installation must
comply with the following requirements in order to ensure optimal performance and
compliance with the RF energy exposure limits in the standards and guidelines.
r The antenna should be mounted outside the building on the roof or a tower if at all
possible.
r As with all fixed site antenna installations, it is the responsibility of the licensee
to manage the site in accordance with applicable regulatory requirements and may
require additional compliance actions such as site survey measurements, signage,
and site access restrictions in order to insure that
exposure limits are not exceeded.
AC Power Supply
( 13.4 V, 30 A )
VX-6000 Operating Manual
i
nstallatiOn
RED: POSITIVE ( + ) Terminal
BLACK: NEGATIVE (–) terminal
AC Outlet
Antenna
XI