Vertex Standard VX-6000 Manual De Operación página 12

r Connect the RED power cable lead to the POSITIVE ( + ) battery terminal, and the
BLACK power cable lead to the NEGATIVE (–) terminal. If you need to extend
the power cable, use #10 AWG or larger insulated, stranded copper wire. Solder the
splice connections carefully, and wrap the connections thoroughly with insulating
electrical tape.
r Wire the cable so that not to disturb with the driving.
r Before connecting the cable to the transceiver, verify the voltage and polarity of the
voltage at the transceiver end of the DC cable using a DC voltmeter.
Now connect the transceiver to the DC cable.
A i
ntennA nstAllAtion
The mobile antenna installation is limited to metal body motor vehicles or vehicles with
appropriate ground planes.
Antennas mounted on the trunk should be located at least the following distance away
from operator and passengers in order to comply with the FCC/IC RF exposure require-
ments. If can not meet these requirements, the antenna must be placed in the center of
the roof.
FCC RF Exposure Requirements
IC RF Exposure Requirements
If can not meet the above distance at the trunk lid mount,
the antenna must be placed in the center of the roof.
X
i
nstallatiOn
Required Distances
LOW VHF Model
5.08 Feet ( 1.55 m )
7.71 Feet ( 2.35 m )
Roof Top Mount
VHF Model
4.85 Feet ( 1.48 m )
5.78 Feet ( 2.31 m )
Should be located at the
above distance or more.
VX-6000 Operating Manual
UHF Model
3.77 Feet ( 1.15 m )
6.14 Feet ( 1.87 m )
Trunk Lid Mount