Promax PROLITE-50 Manual De Instrucciones página 90

•
End Threshold Configuration
This threshold is the end threshold of optic fiber. If the end threshold equals
3.0 dB, then the first event with insertion loss GE 3 dB will be considered as the end of
the optic fiber. If the value is set to 0 dB, there will be no end threshold.
Under parameter configuration, use [
press [ ] to enter, as shown in figure 26. Press [
Use [ ] and [
change the digits. After setting, press [
NOTE: The default setting is 3.00 dB.
•
Delete File
This function is designed to delete saved traces.
Under parameter configuration, use [
press [ ] to enter, as shown in figure 27. Press [
Page 32
Figure 26.- End Threshold Configuration.
] to adjust the position of highlights; use [
] to confirm.
USER'S MANUAL. PROLITE-50/51/52
] and [ ] to highlight "End threshold";
] to exit.
] and [ ] to highlight "Delete file" ;
] to exit.
] and [ ] to
11-2015