Adjusting Airflow Direction - Panasonic S-36PY2E5A Manual De Instrucciones

Adjusting Airflow Direction
This section is described in the instruction manual supplied with the high-spec wired remote controller (CZ-RTC3).
Regarding the timer remote contoller (CZ-RTC2), refer to the Operating Instructions supplied with the model CZ-RTC2.
Adjusting the upward and downward motion of airflow direction
„ Using the high-spec wired remote
controller
Press the
6
Airflow
direction
display
twice to select the FLAP.
Press / to select your desired airflow direction.
Flap fixed
(5 levels)
Recommended vertical airflow direction
Set the flap to the downward position for heating operation.
z
(With the upward setting, warm air cannot reach the floor.)
Set the flap to the upward position for cooling operation.
z
(With the downward setting, condensation may drip on to the
floor.)
HEAT
Recommended Recommended
Display when swing operation
is stopped
Fan and
heating
(5 levels)
STOP
Flap swing motion
Pressing
z
during swing can stop
the flap at your preferred
position.
STOP
COOL / DRY FAN
Fixed to this
position
Cooling and
drying
(3 levels)
or