Inflating Gun - Husky H15123TK Manual Del Operador

SPECIFIC SAFETY RULES
Do not direct the stream of compressed air towards
people, pets or other animals.
Never inflate the objects above the recommended inflation
pressure as this may be dangerous and cause damage
and/or injuries.
OPERATION
Technical data
Model No.: 9045733
Max. Pressure: ..................................................... 180 PSI
Operating Pressure: ............................................. 135 PSI
Inflating tires:
See Figure 22 - 24.
1) Connect the inflating gun to the compressor as
explained in the Compressor manual at chapter
"OPERATION - USING THE AIR COMPRESSOR".
2) Press tab (C) on the fitting and connect the hose of the
gun to the tire by pushing the fitting onto the valve and
then releasing the tab (Fig. 23).
3) Press the tire inflating lever (D) (Fig. 24). Release the
lever and read the pressure reached on gauge (E)
of the gun. Repeat the operation until the pressure
required is obtained. In the case of over-inflation, press
button (F) to reduce inflation pressure.
Inflating balls, rafts and toys:
See Figure 25 - 26.
Insert the appropriate inflation needle or nozzle by
pressing the lever (C) at the end of the inflation gun
hose (see figure 25).
Ensure the compressor is switched to the ON (I)
position.
Begin inflation by squeezing the lever (D) on the
inflation gun (do not over-inflate).
WARNING:
Do not hold down the lever too long before checking the
pressure reached as this could cause explosion of the
object being inflated.
MAINTENANCE
After use, always store the pneumatic tool in a dry, clean
environment. Do not use solvents, flammable or toxic
liquids for cleaning.

INFLATING GUN

C
22
C
E
F
D
INFLATION NOZZLE(S)
C
INFLATION
NEEDLE(S)
Fig.22
Fig.23
Fig.24
Fig.25
Fig.26