Kohler K-895 Guía De Instalación Y Cuidado página 17

8.
Complete the Installation – Drop-In Only
Seat Support
Support
de siège
Soporte
del asiento
Apply silicone sealant.
Rim
Appliquer du mastic à la silicone.
Rebord
Aplique sellador de silicona.
Borde
Cover the framing with water-resistant deck material.
NOTICE: Only apply silicone sealant where instructed.
Using silicone sealant, seal the joints between the water-resistant deck material
and the bath rim at the head and drain end of the bath only. Do not apply
silicone sealant to bath rim running the length of the bath.
NOTICE: The bath rim running the length of the bath is designed to be used as a
grip rail for the bather and a seat support for the optional wood seat (not provided).
To ensure the bath rim is used as designed, allow a 1/16" (2 mm) gap between the
bath rim and the finished material.
Install the finished material. Ensure a 1/16" (2 mm) gap exists between the bath
rim and the finished material for the length of the bath.
Apply a bead of silicone sealant in the groove between the finished material and
the bath rim for the length of the bath.
Install the faucet trim according to the manufacturer's instructions.
Install the wood bath seat (optional, not provided) according to the manufacturer's
instructions.
Compléter l'installation – Installation encastrée seulement
Recouvrir le cadre avec du matériau hydrorésistant.
NOTICE: Appliquer le mastic aux emplacements indiqués seulement.
En utilisant du mastic, sceller les joints entre le matériau hydrorésistant et le
rebord de la baignoire au niveau de la tête et de l'extrémité du drain de la
baignoire seulement. Ne pas appliquer de mastic à la silicone sur le rebord long
de la baignoire.
Kohler Co.
Finished Material
Matériau de finition
Material de acabado
Water-Resistant
Deck Material
Matériau
hydrorésistant
du comptoir
Material de cubierta
resistente al agua
Framing/Cadrage/Estructura de postes
17
1/16"
(2 mm)
Gap
Espace
de 1/16"
(2 mm)
Separación
de 1/16"
(2 mm)
1105828-2-A