Palazzetti ECOPALEX Glass Manual De Instalación, Uso Y Mantenimiento página 32

5.6 SMOKE FITTING - FLUE
and curves in aluminate steel or stainless steel. It can be
connected in two different ways:
A)
cannot be made to pass between the fireplace
and hood it would be a good idea to facilitate the
connection and assembly by making a hole on the
B) using the optional telescopic tube kit. This is the
way to do to it if you are installing your appliance in
space of 2 to 12 cm between the base of the connection
and the upper part of the appliance.
section in the prehood ring must be sealed accurately
(-5.14a- seal, -5.14b-
In fact, if sealing is anything but perfect, air could get
plus the ceramic glass of the door will turn and remain
black. Another consequence would be heat escaping
in wood that are less than 16 cm away from the top
edge of the appliance, such combustible material must
be protected from heat with an insulating panel, such
5.7 INSERTION IN A FIREPLACE
Before anything else, stand the appliance
make it easier to move by using two 2-3 mm thick metal
If the pipes
draught
32
a
b
c
2-12
CM
- 5.14 -
- 5.15 -