ELICA KIT0153054 Guía De Instalación, Uso Y Mantenimiento página 12

3 Install the connector support bracket with screws
(2)4.2x8mm included in kit; put the hood blower
connector in the cavity of the bracket.
B
A. Hood Blower
Connector
B. Connector support
bracket
4 Connect the 9-wire connector assembly supplied with
the external blower motor system to the mating connector
from the range hood.
B
A. Hood Insert
Blower Connector
B. 9 Wire Connector
5 Remove the screws and cover of the hood terminal box.
6 Remove the knockout from the top of the hood terminal
box .
A
A. Terminal box cover
B. Knockout
7 Install UL listed or CSA approved strain reliefs. Run
through the strain reliefs the 9 wire connector
and the external Blower wiring conduit (not incluided
leaving enough wire length to make the wiring
connections.
8 Tighten the strain relief screws.
A
B
C
12
A
A
B
D A. External Blower wiring
conduit (not incluided)
B. 6-9 wire connector
C. Hood Insert
Blower Connector
D. Strain reliefs
9 Remove the strain relief of the Range Hood terminal box,
and run trhough the green (or green/yellow) ground
wire from the wiring conduit. Install and tighten the
removed strain relief.
A
B
C
A. External Blower wiring
conduit (not incluided)
B. 6-9 wire connector
C. Hood Insert
Blower Connector
D. Range Hood strain relief
E. Strain relief
10 Connect the wires from the 9-wire connector assembly
to the wires from the wiring conduit inside the range hood
terminal box.
11 Connect the same color wires to each other (black to
black, white to white, etc.) using UL listed wire connectors.
NOTE: Connect the green (or green/yellow) ground
wire from the wiring conduit to the green (or bare)
ground wire from the home power supply and to the
and to the green/yellow ground wire from the 9-wire
connector assembly (H) using UL listed wire connectors
(see the "Make Electrical Power Supply Connections
to Range Hood" section in the range hood installation
instructions).
B
A
A. Strain relief
B. UL listed wire
connectors
C. Black wires
D. White wires
E. Red wires
F. Blue wires
12 Connect the home power supply wiring to the range
hood following the instructions that are supplied with
the range hood.
13 Reinstall the range hood terminal box cover.
14 Reconnect power.
E
D
C
D
E
F
G
H
I
G. Gray wires
H. Green (or yellow/
green) and green /
yellow wires
I. Motor electrical plug
cable