Regeneration Cycle - COMENDA Hi-Line HB Serie Instrucciones Para El Uso Y El Mantenimiento

Part 2: Reserved for Operator

2.8 REGENERATION CYCLE

Resin regeneration is only possible with the door
CLOSED and the tank EMPTY.
2.8.a FILLING THE SALT TANK
IMPORTANT
The tank is to be filled when alarm F4 appears on the display.
First of all make sure that there is salt in the specific
container and proceed as follows:
1. Unscrew the cap of the salt tank and introduce coarse
kitchen salt.
2. Screw the plug back on all the way to make sure the
tank is sealed.
2.8.b RESIN REGENERATION OPERATIONS
(AUTOMATIC) (only for mod. "A")
Once the cycles set in parameter are reached, A9
appears on the display, which means REGENERATION
REQUIRED.The START button turns red.
ATTENTION
P
ress the START button to not perform the regeneration
phase
2.8.a1 RESIN REGENERATION OPERATIONS
(AUTOMATIC
Touch the START button for a
few seconds
The automatic REGENERATION phase begins.
The START button turns WHITE
The following appears on the display:
"SALT INTRODUCTION".
IMPORTANT
If the door is opened during the regeneration phase
the alarm displays F1 DOOR OPEN.
The cycle is suspended and then restarted again
closure of the same.
F1
ATTENTION
If at the end of the time initially set for the unloading phase
the tank is not empty the alarm will appear on the display
A10 TANK FULL
A10
HB24-34
START START
START START
DOOR OPEN
TANK FULL
At the end of the cycle of regeneration, the machine switches
off automatically and the display reads OFF.
OFF
The machine is now ready for use.
2.8.c MANUAL REGENERATION OPERATIONS
(at the user's discretion)
With the machine ON, perform the following operations:
Touch the SCROLL key
Select the REGENERATION
function from the display
Touch the START key.
The MANUAL REGENERATION phase begins.
The START button turns
WHITE
The following appears on the
display:
"SALT INTRODUCTION"
IMPORTANT
If at the end of the time initially set for the unloading phase
the tank is not empty the alarm will appear on the display
A10 TANK FULL
A10
"RESIN REGENERATION",
"RESIN RINSE"
ATTENTION
A
t this point the dishwasher carries out all the necessary
operations automatically for a preset time, during which the
machine cannot be used.
At the end of the cycle of rege-
neration, the machine switches
off automatically and the display
reads OFF.
The machine is now ready for use.
ATTENTION
O
nly an authorised technician can program the regeneration
parameters.
ENGLISH
START START
START START
TANK FULL
OFF
19