Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung LN-S5797D Manual De Instrucciones Y Del Propietario

Operation

Turning the TV On and Off

Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
Press the POWER button on the remote control.
You can also use the POWER
1
Press the POWER
remote control.
The message "Menu language,
Channels and Time will be set." is
displayed.
Press the ENTER
"Select the language of the OSD" menu
is automatically displayed.
2
Press the ENTER
the language. Press the
button to select language, then the
ENTER button.
"Select the antennas to memorize"
menu is automatically displayed.
3
Press the or
memorize the channels of the
selected connection.
Press the ENTER
select "Start".
If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to
ANT 2 (CABLE), select "Cable".
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the
Contact your local cable company to identify the type of cable system that exists in
your particular area.
4
The TV will begin memorizing all
of the available channels. After all
the available channels are stored,
the Auto program menu reappears.
Press the
ENTER
channel memorization is plete.
To stop the search before it has
finished, press the ENTER
with stop selected.
English-15
button on the front of the panel.
button on the
button, then
button to enter
or
button to
button to
or button, then press the ENTER
button when
button
button.
continued...