Magnavox NB500MG1F Manual Del Propietário página 45

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

7
Use [s / B] to select "Yes", then press [OK].
• Loading of the firmware will start.
Software Update
Current Version
: 1.000
Insert Version
: 1.001
Select 'Yes' and press 'OK' button to start updating.
Press 'No' to exit software update.
Yes
Software Update
1. Loading
2. Updating
Loading Software...
If you want to exit update, press 'RETURN'.
Software Update
1. Loading
2. Updating
Updating Software...
Please wait for a few minutes.
Do not unplug the AC cord or interrupt updating process.
When Update is completed unit will automatically turn Off.
Update disc will eject after unit automatically turns back on.
Updating:
and
flash alternately.
Success :
and
remain on.
* If the indicator shows Error...
1) Unplug the AC power cord and turn the unit again.
2) Confirm the current firmware version.
3) If the firmware version is updated, the software update has succeeded. If not, please follow the steps 2 to 8 on
pages 42-43.
8
After the firmware update finishes, this unit will restart, and eject the disc automatically.
• Software updating is now complete. Please take out the firmware update disc.
Note
• You can check the current firmware version in "Current Version" in "Software Update" menu.
• Please do not unplug the AC power cord while executing "Software Update".
• All settings will remain the same even if you update the firmware version.
EN
FUNCTION SETUP
The indicators blinks for this procedure.
1. Start
DISC IN
No
2. Loading / Updating
DISC IN
3. Finish
(Success)
DISC IN
(Error)*
DISC IN
PLAY
STANDBY-ON
PLAY
STANDBY-ON
DISC IN
PLAY
STANDBY-ON
PLAY
STANDBY-ON
PLAY
STANDBY-ON
43

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido