Magnavox NB500MG1F Manual Del Propietário página 39

Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack)
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the
most of its feature, set up your speakers appropriately by referring to the following table.
How to navigate through "HDMI Multi(LPCM)":
1) Use [K / L] to select your desired menu item then
press [OK].
2) Use [K / L] to select your setting items.
• Press [RETURN] to go back to the previous screen.
3) Use [s / B] to select desired options. (Except for
"Test Tone", "Default" and setting options in
"Speaker Size" setting.)
For setting options in "Speaker Size" setting:
Press [OK] to select desired options.
For "Test Tone":
Use [s / B] to select "Off", "Manual" or "Auto",
then press [OK].
• The test tone will be output. If you select "Manual",
use [K / L] to select desired speaker, then use
[s / B] to adjust the volume. If you select "Auto",
use [s / B] to adjust the volume of the speaker that
outputs the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [OK] to reset to the default.
4) Press [SETUP] to exit.
<Speaker setting for the audio signal output from HDMI OUT jack>
Quick A HDMI Audio Out A HDMI Multi(LPCM)
Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
Menu
Speaker Size Front
Selects the desired
speaker to set. Then
Center
change the setting by
referring to the
Subwoofer
descriptions.
Surround
Surround Back
Default
EN
FUNCTION SETUP
Setting items
Large*
Small
Large*
Small
On
Large*
Small
Large*
Small
Front speaker (left)
Surround
speaker (left)
Surround
back speaker
(left)
e.g.) basic layout with 7.1-channel surround system
Options
Large:
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not provide
strong bass sound.
You cannot change the setting of
"Subwoofer".
Speakers which are not supported by the
connected device will be displayed in gray.
Select "Default", then press [OK] to reset
"Speaker Size" setting to the default.
Front speaker (right)
Center speaker
Subwoofer
Surround
speaker (right)
Surround
back speaker
(right)
Descriptions
37