Checking Fan Speed; Night Well-Being Key; Setting The Operating Programs; Setting The Exact Time - Olimpia splendid UNICO Instrucciones Para La Instalación, Uso Y Mantenimiento

3.3.11

Checking fan speed

Fan speed is checked by button (T5). Pressing this button several times will change the speed in this order: Low, Medium, High
and Automatic.
The higher the speed setting, the greater the output of the air conditioner but also the louder its operation. If you select Automatic
mode, the microprocessor in the air conditioner adjusts the speed automatically, keeping it as high as needed to reach the
temperature setting with respect to the effective room temperature.
As the room temperature nears the setting, fan speed is reduced automatically.
When the unit is operating in dehumidification mode, fan speed adjustment is not possible as it can only function at low speed.
3.3.12

Night well-being key

Press the night well-being (T3) button to obtain several results, specifically:
- Gradual increase of the set cooling temperature.
- Gradual decrease of the temperature set for heating (only HP models).
- Decrease of the unit's noise level.
- Savings on night-time consumption of electricity.
In order to activate the Night well-being key press button (T3) after having selected the required operating mode
through button (T4) and having set the required temperature through button (T7).
Ideally, you should start night well-being mode operation just before you fall asleep.
In cooling, the set temperature is maintained for one hour after activating the night-time comfort button. During the next two hours
the setting increases gradually, whilst the running of the fan is set to low speed. After the second hour, the temperature and fan
speed settings do not change any longer.
In heating mode, the set temperature is held for one hour after starting Night well-being mode operation.
During the next two hours the setting decreases gradually, whilst the running of the fan is set to low speed.
After the second hour, the temperature and fan speed settings do not change any longer.
The 'night well-being' key is not available when the unit operates in dehumidification and ventilation mode.
The night well-being mode button may be disabled at any time (ideally when you wake up in the morning) by pressing button T3
again.
At this stage the temperature and fan speed settings made prior to starting Night well-being mode operation go back into effect.
3.3.13

Setting the operating programs

The air conditioner logic provides the user with a choice of two operating programs that can be set to start and stop at programmed
times, for example you might want the air conditioner to start shortly before you return home so that it is cool when you get there.
To use these functions it is first necessary to set the exact time on the remote control and then set the time for the programs to
start.
3.3.14

Setting the exact time

Proceed as follows to set the exact time:
a) Press button (T6) Time and Program Setting, as many times as necessary to display the hour indication H (D10).
b) Press the toggle button (T7) to increase or decrease the displayed hour until it matches the exact time.
c) Press button (T6) again to display the minutes indication M (D10).
d) Press the toggle button (T7) to increase or decrease the displayed minutes until it shows the exact time in minutes.
3.3.15

Setting the times of the 1st and 2nd the operating programs (PROGR. 1 and PROGR. 2)

To set the times for starting and stopping the two air conditioner programs, proceed as follows:
a) Press button (T6) Time and Program Setting, as many times as necessary to display the indication
program).
b) Press the toggle button (T7) to increase or decrease the display of the time when you want program 1 to start.
Every time you press one end of the toggle button the time increases or decreases by 30 minutes.
c) Press button (T6) Time and Program Setting once again to display the indication
d) Press the toggle button (T7) to increase or decrease the indication of the time when you want program 1 to stop. Every time
you press one end of the toggle button the time increases or decreases by 30 minutes.
e) Press button (T6) Time and Program Setting once again to display the indication
f ) Press the toggle button (T7) to increase or decrease the display of the time when you want program 2 to start.
Every time you press one end of the toggle button the time setting increases or decreases by 30 minutes.
g) Press button (T6) Time and Program Setting once again to display the indication
h) Press the toggle button (T7) to increase or decrease the indication of the time when you want program 2 to stop. Every time
you press one end of the toggle button the time increases or decreases by 30 minutes.
i) To return to the routine operating mode just press the button (T6) as many times as necessary to clear the relevant indications
from the display.
1 (Time to start the 1st
1 (Time to stop the 1st program).
2 (Time to start the 2nd program).
2
(Time to stop the 2nd program).
UNICO INVERTER
3
37