Denon AVR-3802 Instrucciones De Operación página 25

[4] Combining the currently playing sound with the desired image
1
Simulcast playback
Use this switch to monitor a video source other
than the audio source.
VIDEO SELECT
Press the VIDEO SELECT
button repeatedly until the
desired source appears on
the display.
(Main unit)
Cancelling simulcast playback.
• Select "SOURCE" using the VIDEO
SELECT button.
• Switch the program source to the
component connected to the video input.
[5] Checking the currently playing program source, etc.
1
On screen display
• Each time an operation is
OSD
performed, a description of
that operation appears on
the display connected to the
(Remote control unit)
unit's VIDEO MONITOR OUT
jack.
Also, the unit's operating status can be
checked during playback by pressing the
remote control unit's OSD button.
Such information as the position of the input
selector and the surround parameter settings
is output in sequence.
Front panel display
• Descriptions of the unit's
STATUS
operations are also displayed
on the front panel display.
In addition, the display can
be switched to check the
(Main unit)
unit's operating status while
playing a source by pressing
the STATUS button.
B
1
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR. 1
OSD
PARA.
SETUP RETURN
TUNING
A/B
MEMORY
BAND MODE
1
Using the dimmer function
DIMMER
• Use this to change the brightness of
the display.
The display brightness changes in
four steps (bright, medium, dim and
(Main unit)
off) by pressing the remote control
unit's DIMMER button repeatedly.
The brightness changes in 3 steps each time the
button is pressed, and finally the display turns off.
Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the REC/MULTI button.
REC /
MULTI
(Main unit)
2
With "RECOUT SOURCE"
FUNCTION
displayed, turn the FUNCTION
knob to select the source you
wish to record.
• The "REC" indicator and the
(Main unit)
indicator of the selected
source light.
3
Set the recording mode.
• For operating instructions, refer to the manual
of the component on which you want to
record.
4
To cancel, turn the function
FUNCTION
knob and select "SOURCE".
• When "SOURCE" is selected,
the "REC" indicator turns off.
(Main unit)
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1
Press the REC/MULTI button.
REC /
MULTI
The display switches as follows
each time the button is pressed.
(Main unit)
2
With "M-SOURCE SOURCE"
FUNCTION
displayed, turn the FUNCTION
knob and select the source you
wish to output.
• The "MULTI" indicator and
(Main unit)
the indicator of the selected
source light.
3
Start playing the source to be output.
• For operating instructions, refer to the
manuals of the respective components.
4
To cancel, turn the function
FUNCTION
knob and select "SOURCE".
• When "SOURCE" is selected,
the "MULTI" indicator turns
off.
(Main unit)
ENGLISH
2,4 2
B
1
Display 2
REC PHONO CD TUNER DVD VDP TV / DBS
VCR -1 -2 TAPE
RECOUT SOURCE
NOTES:
• Recording sources other than digital inputs
selected in the REC OUT mode are also output to
the multi source audio output jacks.
• Digital signals are not output from the REC
SOURCE or audio output jacks.
2,4 2
B
1
Display 2
PHONO CD TUNER DVD VDP TV / DBS
MULTI VCR -1 -2 TAPE
M-SOURCE SOURCE
NOTES:
• The signals of the source selected in the MULTI
mode are also output from the VCR-1, VCR-
2/V.AUX and CDR/TAPE recording output
terminals.
• Digital signals are not output from the multi
source audio output jacks.
25