Label Design Requirements - Rimage Everest III Manual De Instrucciones

Rimage Everest III printer

Label design requirements

The Everest printer Windows compatible software ships with a label editor called CD Designer™,
which is installed on your PC during a typical installation of the Rimage software. If you have a
Windows based PC, you can use CD Designer to design your labels.
Notes:
CD Designer is not Macintosh compatible and will not be installed with the Macintosh
o
compatible software.
If you are using a Macintosh computer or you have another software application that you
o
prefer, you can create a label and save it as an Acrobat
Important!
If you are using a standalone Everest printer or an AutoEverest AutoPrinter, you can print
o
using a label file designed in any program.
If your Everest printer is on a Rimage autoloader (except the AutoEverest AutoPrinter)
o
and using Windows compatible software, only the Acrobat (.pdf) or CD Designer (.btw)
file can print directly to the Everest printer.
To create a label with a software application other than CD Designer, use the following criteria:
•
Color depth – Save the artwork for the label with the color set to millions of colors.
•
DPI – Use pictures or logos set to 300 DPI (dots per inch).
•
Label design size – A full size disc is 120 mm (4.723"). The hole is 15 mm (0.59"). The
printable area and hub sizes vary depending on the disc manufacturer.
Printable
Area 118 mm
•
Media – The media that is in Rimage Media Kits™ has a printable area of 24-118 mm.
On most labels, print settings of 24 mm and 118 mm are recommended. For more
information about Rimage Media Kits™ – convenient packages of thermal retransfer-
printable discs and ribbons, all guaranteed by Rimage – contact Rimage at 800-445-
8288.
2
Hub Size
24 mm
®
(.pdf) file, a .jpg file, or a .tiff file.
110875_A