Changing The Print Ribbon - Rimage Everest III Manual De Instrucciones

Changing the print ribbon

Before you change the Everest print ribbon, allow time for the new ribbon to become acclimated
to the environment. Allow more time for greater temperature and humidity differences.
Important! Ribbons must be stored at a temperature between 50°– 90°F (10°– 32°C). Avoid
moisture and direct sunlight. Do not reuse ribbons.
1. Power off the printer.
2. Remove the print ribbon.
a. Press the two side cover
latches to release the side
cover.
b. Lower the side cover.
c. Turn latch 1 counter-
clockwise.
d. Remove the print ribbon
carrier.
e. Remove the print ribbon
from the carrier.
3. Discard the used print ribbon.
Tip: Perform cleaning
procedures while the print
ribbon is removed. For more
information see
Everest printer. Refer to
page 25.
110875_A
Side cover
Cleaning the
Maintain the Everest printer
Side cover latches
Print ribbon carrier
Latch 1
21