When The Oven Is Working; Altering Parameters; Cancelling A Cooking Cycle; End Of A Cooking Cycle - Kuppersbusch ML6330.0 Instrucciones De Uso E Instalación

Food Weight
300 g
400 g
200 g
Quiches
300 g
and Pies
---
Hamburgers 400 g
200 g
Oven chips
Interrupting a cooking cycle
You can stop the cooking process at any
time by pressing the Function Selector knob
(1) once or by opening the oven door.
In both cases:

Microwave
immediately.

The grill is de-activated but is still
very hot. Danger of burning!

The timer stops and the display
shows the remaining amount of
operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will
be evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the
function selector knob (1) for 3
seconds.
To restart the process, close the door and
press the Function Selector knob (1).

Altering parameters

The operating parameters (time, weight,
power, etc.) can be altered when the cooking
Cooking Time
6 min
7 min
5 min
6 min
8 min
5 min
5 min
emission is stopped
Standing Time
2 min If the pizza is high increase the time
by 1 – 2 minutes
2 min
2 min
A temperature compensation is
achieved through the standing time
2 min
Turn 2 x
2 min
--- Turn 1 x
2 min If the pizza is thin.
If the pizza is high increase the time
by 1 – 2 minutes
process has been interrupted by proceeding
as follows:
1. To alter the time, turn the rotating knob (3)
and confirm by pressing the function
selector knob (1). The new time defined is
immediately valid.
2. To alter the power, press the function
selector knob (1). The respective light start to
flash. Alter the parameter by pressing the
rotating knob (3) and then turn the rotating
knob (3), confirm by pressing the function
selector knob (1) again.

Cancelling a cooking cycle

If you wish to cancel the cooking process,
press the function selector knob (1) for 3
seconds.
You will then hear a beep and the time will
appear on the display.

End of a cooking cycle

At the end of the process you will hear three
beeps and the display will show the word
.
The beeps are repeated every 30 seconds
until the door is opened or the function
selector knob (1) is pressed.
english
Recommendation
17