Troubleshooting; Technical Data; Limited Warranty - GreenWorks Pro PH60L210 Manual Del Operador

12

TROUBLESHOOTING

Problem Possible cause
The battery pack is
not installed tight-
ly.
The motor shuts
down whilst work-
The battery pack is
ing.
out of power.
The machine has
damage.
The machine
The machine has
smokes during op-
damage.
eration.
The machine has
damage.
The motor is on,
blades do not
move.
The blades are
blocked.
The parts are loos-
Too much noise
en.
and/or vibration is
experienced while
working.
The parts have
damage.
13

TECHNICAL DATA

Voltage
No load speed
Blade length
Cutting capacity
Weight (without battery
pack)
Battery model
English
Solution
Make sure that
you tighlty instal-
led the battery
pack in the ma-
chine.
Charge the battery
pack.
Do not use the ma-
chine and speak to
service center.
1. Immediately
stop the ma-
chine.
2. Remove the
battery.
3. Speak to serv-
ice center.
Do not use the ma-
chine and speak to
service center.
Remove battery
then clear block-
age from the
blades.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
chine and speak to
service center.
60V
3200 (±10%) SPM
20"
1.2"
9.26 lbs. (4.2 kg)
LB602, LB6025, LB603,
LB604, LB605, LB606 and
other BAC series
Charger model
14

LIMITED WARRANTY

BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
11
CAC801, CH60DP01,
CH60R00 and other CAC
series
GARANTIE OUTIL &
Canadian address:
Greenworks Tools Canada Inc.
P.O. Box 93095, Newmarket,
Ontario
EN