Ribind K800 Manual De Instrucciones página 39

ACCESSORIES -
PLATE TO BE CEMENTED
BLOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILA-IN
SPARK
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 433
TOUCH
MECHANICAL SAFETY STRIP L = 2 m
CERTIFIED EN 13849-2 (2008) CATEGORY 3
For the connections and the technical data of the optional equipments follow the relevant handbooks.
code ACG8107
code ACG1053
code ACG1048
code ACG7059
code ACG7042
code ACG5452
code ACG3015
NYLON RACK MODULE 4
with zinc plated angle Iron, In 1mt. bars. Ideal for gates up to 1,000 kg / 2,200 lbs weight.
1 m / 3,28"
10 m / 32,8" (1 m / 3,28" x 10)
RACK MODULE 4
with zinc plated angle Iron, in 2 m bars.
Ideal for gates up to 1,000 kg / 2,200 lbs weight.
FIT SYNCRO
FIT SYNCRO PHOTOCELLS for the wall-installation
The range you can set is 10-20 m, 30÷60ft.
You can fit many couples close together thanks to the synchronising circuit.
Add the SYNCRO TRANSMITTER
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
PAIR OF COLUMNS FOR FIT SYNCRO
39
code ACS9000
code ACS9001
code ACG8026
H = 0,5 m
VERTIGO
PHOTOCELLS SUBSTITUTING THE SAFETY STRIP
CERTIFIED EN 12978 - EN 13849-2 PL "c" CAT 2
VERTIGO 8 cod. ACG8044
VERTIGO 10 cod. ACG8045
VERTIGO WIRELESS 8 cod. ACG8061
VERTIGO WIRELESS 10 cod. ACG8062
Applicable vertically and horizontally to sliding and swing
gates.
G
B
code ACS9050
code ACG8028
code ACG8051
code ACG8057