Spring Housing/Piston Assembly Removal - Horton DRIVEMASTER Instrucciones De Instalación

3. Unscrew the Fan Mounting Disc from the Jack Bolt. Inspect the Fan Mounting Disc for wear or damage.
(See examples below)
Step 3
Fan Mounting Disc
Good Condition

Spring Housing/Piston Assembly Removal

4. Hand-tighten the Cage Nut (from the Repair Kit)
onto the Jack Bolt (left hand thread) over the
Spring Housing. The Cage Nut will keep the Spring
Housing and Piston together as an assembly. It will
also maintain pressure on the internal Springs after
the Button Head Screws are removed.
Remove air pressure from the unit before
proceeding to Step 5.
FAILURE TO RELEASE AIR PRESSURE MAy
RESULT IN SERIOUS PERSONAL INjURy.
Do not disassemble the Spring Housing. Personal
injury could occur.
5. Remove the 8 Button Head Screws and the Friction
Liner using a T27 Torx Bit.
Fan
Mounting
Disc
(left hand thread)
Look for signs of damage or blistering
Fan Mounting Disc
Bad Condition
Button
Head Screws
Friction Liner
Cage Nut
Spring
Housing/
Piston
Assembly
Steps 4-5
9
English
Jack Bolt
22748-J-0407