PreciseFit 45-0309-062 Manual Del Usuario página 8

35. Place a 5/8" flat washer, the compression spring and
another 5/8" flat washer onto the shaft. See figure 16.
(T) 5/8" FLAT
WASHER
FIGURE 16
36. Place two spike disks, separated by a long spacer tube,
onto the shaft. Fit the long spacer tube onto the ends of
the flanged bearings in the disks. See figure 17.
(CC) LONG SPACER TUBE
FIGURE 17
(Z) COMPRESSION
SPRING
SPIKE DISK
ENGLISH
37. Place two 5/8" flat washers separated by a long spacer
tube onto the shaft. See figure 18.
(CC) LONG SPACER TUBE
FIGURE 18
38. Place two spike disks, separated by a long spacer tube,
onto the shaft. Fit the long spacer tube onto the ends of
the flanged bearings in the disks. See figure 19.
(CC) LONG SPACER TUBE
FIGURE 19
8
(T) 5/8" FLAT WASHER
SPIKE DISK