Tabla de contenido
Idiomas disponibles
Idiomas disponibles
You have successfully completed all your validation tests. You can now carry out the last operations
below:
7
x4 x4
Warning: it is essential that the
4 caps are put in place.
Regularly check the water level in your pool, especially when the weather is very hot,
or rainy, or if it has been windy for several days. The immersion depth must imperatively be
22 centimeters +/- 3 centimeters. If you do not follow these instructions your immersion
detector will not work properly.
YOUR IMMERSION DETECTOR IS NOW ACTIVATED (GREEN INDICATOR
Make sure that you are no longer in TESTS mode: the siren must be at full volume (100dB)
You must always perform additional fall tests at different locations in the pool (including
steps); the siren will go off loudly. If you do not stop it manually by moving the magnet over
the swimmer symbol, the siren will sound for 1 minute and 30 seconds.
Check that the alarm can be heard from the residence/living quarters. If such is not the case,
install in the residence/living quarters the optional Remota™ remote siren available at your
retailer's.
8
Fill out the test validation sheet and send it
back to the manufacturer in the T envelope
(postage prepaid) provided.
LIGHT FLASHING)
17
Tabla de contenido
