Installation - Blumfeldt Dark Wave Stand Manual Del Usuario

EN
20

INSTALLATION

Prior to assembly, read the instruction carefully. Check all parts against the
parts list.
This product MUST NOT be used if the power cable is damaged. If there is
damage this product must be disposed of. For ease of assembly only loosely
tighten bolts and then tighten fully when assembly is complete.
WARNING-DO NOT over tighten bolts: only tighten with moderate pressure
to avoid damaging the bolts or components of the heater.
Assembly diagram
IMORTANT
Remove any packaging before use, but retain the safety instructions and store
them with this product. Please refer to diagram A on page 4 when following
the instructions blew.
WARNING: Danger of electric shock
When moving or adjustable the height of the heater, ensure
it is unplugged from the power source and is completely cold
before attempting to moving the unit.