Removing Clogged Debris From The Impeller - Toro 51593 Manual Del Operador

Removing Clogged Debris from the
Impeller
1. Turn off and unplug the vacuum from the power source and wait
for all moving parts to stop.
2. Remove the vacuum tube.
3. Remove the debris from impeller blades.
4. Check the impeller for any signs of damage. If it is damaged,
contact your Authorized Toro Dealer.
5. Install the vacuum tube or, if you want to switch to blower mode,
the bottom inlet cover. Refer to Converting from Blower to Vacuum
or Converting from Vacuum to Blower for more information.
Service
Toro has designed this product to give you years of trouble free use.
Should it need service, bring the product to your Authorized Toro
Service Dealer. Your Toro Dealer is specially trained to repair Toro
products and will ensure that your Toro stays "All" Toro.
Double-insulated (Class 2) Appliances
In a double-insulated (Class 2) appliance, two systems of insulation
are provided instead of grounding. No grounding means is provided
on a double-insulated (Class 2) appliance, nor should a means for
grounding be added to the appliance. Servicing a double-insulated
(Class 2) appliance requires extreme care and knowledge of the
system, and should be done only by the qualified service personnel
at your Authorized Toro Service Dealer. Replacement parts for a
double-insulated (Class 2) appliance must be identical to the parts they
replace. A double-insulated (Class 2) appliance is marked with the
symbol (square within a square)
Storage
Store the blower/vacuum and extension cord indoors, in a cool dry
location, out of reach of children and animals.
Troubleshooting
•
Ensure that the bottom inlet cover or vacuum tube is locked in
place.
•
Ensure that the power cord is secured in place on the back of the
blower and that the plug is fully seated.
6
.