Taking Still Photos - Bushnell 118325 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

Taking Still Photos

After following the initial setup as described in the previous pages, you are ready to take a photo:
1) Raise the LCD and press and release the Power button (red LED lights, startup screen appears).
2) The Instant Replay will default to 5MP resolution and high quality settings, as well as "everything on automatic" when it is
turned on for the first time, so you can take excellent photos right away. If you prefer to use different settings, refer to the section
"Using the Main Menu" for directions regarding how to find and change settings such as resolution, exposure and other options.
3) You may compose your photo while looking through the binocular (the LCD does not need to be on to take a photo). However,
for the most accurate framing, checking the LCD preview is recommended.
) Be sure you are not closer than approximately 30 feet from your subject. The binocular optics will focus closer than this, but the
camera focus is preset for best results with distant subjects (no focusing is necessary for the camera). The LCD may be used to verify
that the subject is not too close for sharp results.
5) Hold the camera as steady as possible with both hands and lightly press the Shutter button. The display will "freeze" briefly,
confirming the captured image while the file is stored, then you are ready to take another photo. The number in the lower left
corner of the LCD will show the number of remaining photos you can take, based on available, unused memory (on the SD card,
or internal memory if no card is used). Once you reach "0000", and the display indicates "Memory Full !" when Shutter button is
pressed, you are out of memory (storage space) and should download photos you wish to keep so they may be deleted, or you may
remove the filled up card and install another SD card.
6) Digital zoom up to 3x is available. Press the Down arrow key to zoom in (you will see the result on the LCD). Press the Up
arrow key to zoom back out. No digital zoom is used (optical magnification only) when "1.0" is indicated next to the magnifying
glass icon.
7) Press the View button if you wish to check the photo after you take it, then press it again to return to a live preview. See the sec-
tion "Review Menu" for more regarding reviewing and deleting previously taken photos.
Warning: Use care during handling to avoid touching the camera lens (located in the center between
binocular lenses) to prevent degrading the image quality. Clean the camera lens only with dry lens
12
tissue or microfiber cloth. DO NOT use liquids of any type.
Tabla de contenido
loading

Tabla de contenido