Operation Limits - Glass 1989 SPA Manual De Uso

SET READY and REST
MAIN SCREEN
temperature key "ON" and set the time
time programming with the "LUCE"
(LIGHT) key.
NOTE: The current time is not saved
in the event the spa power supply fails.
When the system is started, the pre-set
value is 12.00h
particular moment of the day, set the clock
to the current time in order to be sure they
start at the required time.
NOTE: the time view can be set in 12
hours (AM-PM) or 24 hours from the
"PREF"->" " menu.
"LOCK":

OPERATION LIMITS

The "LOCK" setting allows you to inhibit
some functions of the keyboard or to block
the temperature adjustments.
The temperature block (TEMP) allows the
"JETS" and other functions to be used,
but the pre-set temperature and other
programmed settings cannot be adjusted.
access to a reduced selection of menu
entries.
The PANEL lock prevents it from being
used (e.g. from children), however, all
the automatic functions set remain active.
select between "READY" and "REST"
pass to the subsequent parameter
of the "MAIN MENU"
TIME" with the
17
on the display
set
Or wait a
few seconds
SET "LOCK"
MAIN SCREEN
pass to the subsequent parameter
of the "MAIN MENU"
LOCK
Temperature and settings
DO NOT LOCK
To unlock the panel, hold the "UP" key
down and simultaneously press the
"LUCE" (LIGHT) key twice (the message
"UNLK" appears on the display to indicate
the occurred operation).
"HOLD":
STANDBY
This standby mode ("HOLD") disables the
pumps during the service functions (spa
LOCK
all the function keys
LOCK
set
Or
EN