Description; Transport And Storage; Maintenance; Warranty - VALPES ER PLUS Serie Manual De Instalación Y Funcionamiento

ENGLISH

DESCRIPTION

These electric actuators have been designed to perform the control of a valve with 90° rotation. Please consult us for any different appli-
cation. We cannot be held responsible if the mentioned actuators are used in contradiction to this advice..

TRANSPORT AND STORAGE


The forwarding agents being held as responsible for damages and delays of the delivered goods, the consignees are obliged to ex-
press if applicable their reserves, prior to accept the goods. The goods delivered directly ex works are subject to the same conditions.

The transport to the place of destination is carried out by using rigid packing material.

The products must be stored in clean, dry, and ventilated places preferably on appropriate palettes or shelves.

MAINTENANCE


Maintenance is ensured by our factory. If the supplied unit does not work, please check the wiring according to the electric diagram as
well as the power supply of the concerned electric actuator.

For any question, please contact our after-sales service.

To clean the outside of the actuator, use a lint and soapy water. DO NOT USE CLEANING PRODUCT WITH SOLVENT OR ALCOHOL

WARRANTY


100% of the actuators are fully tested and set in the factory.

These products are 3-year warranty from the delivery date or 50,000 actuations against all types of manufacturing and material faults
(operating time and model class according to standard CEI34).

This guarantee will only be valid if the unit has not been disassembled or self-repaired during its service life. It does not cover any wear
and damage caused by shocks or faulty operation neither by the use of the unit under conditions not in accordance with its nominal
characteristics. The guarantee is strictly limited to the replacement of original parts found defective on checking by our service person-
nel. The cost of shipping to our premises, the return of devices to the customer as well as the repair cost will be chargeable. We will
not assume the responsibility for any direct or indirect accidents/risks originated by a failure of our products. The guarantee does not
cover the consequences of breakdown and excludes any payments for indemnities. The accessories and adaptations are excluded
from the guarantee. In the case where a customer has not proceeded to payments within the agreed period, our guarantee will be
suspended until the delayed payments have been received and with the consequence that this suspension will not prolong the guaran-
tee period in any case.

RETURN OF GOODS


The customer is obliged to check the conformity of the goods with regard to their definition at the time of delivery.

The acceptance of the goods by the purchaser disclaims the supplier of all responsibility if the purchaser discovers any non-conformity
after the date of acceptance. In such case, the repair cost will be borne by the purchaser who will also exclusively bear all financial
consequences of any resulting damage. Returned goods will only be accepted if our prior agreement has been given to this proce-
dure : the goods must be sent free of all cost and being shipped solely and in their original packing. The returned goods will be credit-
ed to the purchaser with a reduction of 40% on the unit's price charged in accordance with the original invoice of the returned goods.

SAFETY INSTRUCTIONS


The electric power supply must be switched-off before any intervention on the electric actuator (i.e. prior demounting its cover or ma-
nipulating the manual override knob).

Any intervention must only be carried out by a qualified electrician or other person instructed in accordance with the regulations of
electric engineering, safety, and all other applicable directives.

Strictly observe the wiring and set-up instructions as described in the manual: otherwise, the proper working of the actuator can not be
guaranteed anymore. Verify that the indications given on the identification label of the actuator fully correspond to the characteristics of
the electric supply.

Do not mount the actuator « upside down ». Risks:

Declutching mechanism failure

Possible flow of the grease on the electronic board

Do not mount the actuator less than 30 cm of a electromagnetic disturbances source.

Do not position the equipment so that it is difficult to operate the disconnecting device.
DSBA3200 • Rév. 15/02/2018
UK
To be read prior to the installation of the product
17