Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Always wear proper personal hearing protection that conforms
to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise
from this product may contribute to hearing loss.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
kW .........................kilowatts
F .............................farads
μF ...........................microfarads
l ..............................litres
g .............................grams
kg ...........................kilograms
bar .........................bars
Pa ..........................pascals
h .............................hours
min .........................minutes
s .............................seconds
n o ..........................no load speed
.../min or min-1 ... Revolutions or
reciprocations per minute
or DC ..... direct current
or AC ...............alternating
2
.................... two-phase alternating
current
SAVE THESE INSTRUCTIONS
MOTOR
Be sure your power supply agrees with the nameplate marking. Voltage decrease of
more than 10% will cause loss of power and overheating. PORTER-CABLE tools are
factory tested; if this tool does not operate, check power supply.
•
Four height rod sections
•
Two cutting bits
•
Open end wrench
•
Two flat washers
FUNCTIONAL DESCRIPTION
FOREWORD
The Model 513 Lock Mortiser permits builders and contractors to quickly cut true,
accurate mortises for door-box locks.
The Model 517 Lock-Face Template allows quick and economical routing for lock
faces on doors after the mortise has been completed.
INTENDED USE
This heavy-duty door mortisor and face template is designed for professional routing
applications.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This is a professional power tool. DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.
2N
3
..................... three-phase alternating
3N
.......................... protective earth
.......................... Class II Construction
IPXX ....................... IP symbol
CARTON CONTENTS
•
Two cap screws
•
Hex Wrench
•
Motor unit
•
Mortiser frame
6 6
.................. two-phase alternating
current with neutral
current
.................. three-phase alternating
current with neutral
............... rated current of the
appropriate fuse-link in
amperes
................... time-lag miniature fuse-link
where X is the symbol
for the time/current
characteristic, as given in
IEC 60127
(double insulated)
Tabla de contenido
