3. INSTALACIÓN PLACAS CALLE.
INSTALLATION OF STREET PANELS.
3.1 PLACA CALLE SISTEMA MODULAR: INSERCIÓN DE MÓDULOS.
STREET PANEL MODULAR SYSTEM: INSERTING MODULES.
1
Separate the covers (A1, A2), loosen
both screws (T1, T2) and extract the
joints of the modules (J).
Apart from the main internal access (PIP), a maximum of 63
secondary internal accesses (PIS) and up to 255 dwellings can
be connected to each internal dwelling bus, since the
telephones/monitors can be configured with a number between
1 and 255. There may be several telephones or monitors in
each dwelling, depending on the number of power supplies
installed. All the telephones or monitors in a dwelling will have
been programmed with the same but only one of these will be
configured as the main one and the rest as extensions.
The internal buses of the blocks of dwellings are independent
from each other. Also, each internal dwelling bus is also
independent from the external street panel bus. This characteristic
makes it possible for simultaneous calls to be made to different
dwellings from the same installation, as long as these do not
occupy the same communication bus.
For example, when communication is established between an
external access and the dwelling in a specific block, the system
will allow communication to be established between any internal
access and one of its dwellings in any other block of the
installation.
Otherwise, if a block of dwellings has established communication
between one of its internal accesses and one of its dwellings,
the system will allow communication to be established between
any external (or internal) access and one of its dwellings in any
other block of the installation.
2
Introduce the modules and joints through the screws.
IN THE CASE OF AUDIO BOARDS, ALWAYS PLACE THE AUDIO MODULE
IN THE UPPER PART. WITH VIDEO BOARDS, ASSEMBLE THE CAMERA
MODULE ABOVE THE AUDIO MODULE.
A WINDOW MODULE MUST ALWAYS BE PLACED UNDER THE AUDIO
MODULE. THE DIGITAL AUDIO GROUP OCCUPIES TWO MODULES.
