Tabla de contenido
LISTEN WIRELESS®
Q u i c k S t a r t
Charging Listen Wireless®
Before using your headphones for the first time, charge
their battery for 3 hours in order to optimise the battery
capacity and service life. Only use the original USB cable
in order to avoid causing any damage. You can use the
headphones normally while they charge.
To recharge your headphones, connect the USB cable
supplied to the micro-USB port on the battery module
and to a computer USB port or a USB mains adapter. The
indicator light will light up orange when on charge, and it
will turn white when the headphones are fully charged.
The headphones can take up to 3 hours to fully charge.
Pairing Listen Wireless® headphones to your Bluetooth®
devices.
Your Listen Wireless® headphones can store up to
8 Bluetooth® devices in memory and can connect to
2 devices simultaneously. Pairing can be done two ways:
• Manual pairing
• NFC pairing
When the headphones are first turned on, they will
automatically go into pairing mode (the indicator light
flashes quickly).
• Manual pairing
Once your headphones are fully charged, press and hold
the "Bluetooth® Command" button for 5 seconds (the
Bluetooth® indicator light will turn blue and flash quickly).
The headphones will stay in "pairing" mode until a device
is connected (Listen Wireless® stays in pairing mode for
up to 5 minutes). Activate the Bluetooth® mode on your
Bluetooth® device, then connect your Listen Wireless®
headphones. For more details, refer to the user manual
for your Bluetooth® device. The Bluetooth® indicator light
will light up blue when the headphones are connected to
a device.
CAUTION:
require a password when you try to connect
them to your Listen Wireless®. If so, enter 0000
when prompted.
NFC pairing:
Make sure your Bluetooth® device is equipped with an NFC
function and check that it is activated. For more details,
refer to the user manual for your device. Place your device
so that the two NFC detection areas (on the headphones
and your device) are next to each other. The Bluetooth®
indicator light will light up blue when the headphones are
connected to a device.
Some
Bluetooth®
English
12
versions
may
Tabla de contenido
